Things You Need To Know About Auto Racing Brake Pads

There is a difference between street, autocross and racing brake pads

The biggest difference is the operating temperature and the overall coefficient of friction, according to Todd Miller, Product Manager for Hawk Brake Pads.
Street pads are tuned for comfort and have to work in all type weather conditions. Autocross pads are hi performance pads that will stop better than a street pad, but must still work at low temperatures. Road Racing pads must work at higher temperatures, but can sacrifice some stopping ability at low temperatures. There will always be trade-offs though. Dust, rotor wear, pad wear, and noise to just name a few.
There are many different types of auto race pads. These are specific racing brake pads designed for the car and type of racing (sprint, endurance, etc).

2. There is no one “all around” racing brake pad

Every brake pad has trade-offs. The type brake pad best suited to your needs depends on the type of racing that you do. Braking Performance and abuse tolerance are the most important things to consider when selecting a pad for racing. Pads with low dust are harder and will not stop as well. High temperature Road Racing pads will not work well at low temperatures and will wear the rotors quickly when cold. When starting out many people can use all purpose pads, but as the speeds increase full racing pads will almost certainly be needed.

3.Brake pad size has a limited effect on stopping power
Just because a pad is bigger does not mean it will stop better, according to Todd Miller, Product Manager for Hawk Brake Pads.
Racing pads required heat to work best. Andreas Boehm of Pagid Brakes points out that the size of the pad is one element of how much heat it can handle. Generally, the higher the temperature helps the car stop better. Miller also points out that the rotor, pad and caliper all play a role in the overall brake system.

4. Auto racing brake pads need to be heated up to work best

Racing pads require heat because of the chemical makeup of the friction formulation. Without heating up, a racing brake pad will harm the rotor and will wear more quickly. When the rotors arent heated up properly, they will wear quicker than normal and ring-grooving will occur. This can cause premature rotor and pad wear. Some racing pads can wear out a new set of rotors in only a few hundred street miles, but will last a full season on the track.

5. Avoid being too aggressive with the type of brake pad you select

Your tires really impact you in this area. As Boehm points out, “there are definitely too aggressive of a pad for certain applications.” Safety is an issue here as well. If the bite of the pad is greater than the tire can handle, you could go into a slide by locking up the tire. Too aggressive a pad can be hard to modulate. Brake pads meant for high down force cars can be almost digital on a lightweight sports sedan.

6. Lots of factors cause racing brake pads to squeal

Noise, vibration and harshness (NVH) are engineered to different levels by different manufactures of brake pads. These factors influence the degree of squeal. The hardness of racing brake pads, the axle, calipers and rotors all impact the degree of squeal. Youll also find that material composition, physical pad design, level of coefficient friction produced and transfer film quality influence squeal.

7. Brake pads can get too hot

Getting the pad too hot can cause some ingredients in the pad to evaporate out of the material. This can cause uneven wear and noise. Some manufacturers slot or cross drill the rotors and include vents to control heat. Care should be used in making sure the pad is within its operating temperature range. Use cooling ducts or larger rotors if necessary. If the pads get too hot:

They will either “Glaze” or you can thermal shock them.

Glazing
A hardening of the brake pad surface in which very little or no wear takes place
Work hardening / Gradual loss of M, NVH
High speed stop or brake drag / Aggressive loss of M, NVH

Thermal Shock
A sudden burst or extended dwell time of heat energy that exceeds the brake pads thermal capacity damaging both the surface and underlying material
Glazing or excessive pad wear

8. You can tell if your brake pad is too aggressive

Excessive heat can be caused by using the wrong racing brake pad. You can mainly determine this through the effort needed on the brake pedal. Sometimes you have to push the pedal too far to the floor to stop the car. This causes a lot of heat and is hard on the discs. You have an aggressive pad if you need little pedal pressure. The weight of the car, down force involved, whether the car has ABS, the type of racing, and type of tire will determine the degree of aggressiveness best for you.

9. Braking harder for shorter periods of time will reduce overall heating of the brake system

Boehm says you can really notice the impact of stopping shorter and harder. There is less brake wear and lower temperatures with hard, short stopping. All brake pads have a maximum operating temperature. Make sure your stopping practices keep pad temperature within manufacturer specifications.

10. Look for continued developments with racing brake pads

Performance brake pads are going very much in the direction of ceramic, rotors too. Ceramic handles more heat, creates less brake dust and is better on the environment. Miller points out the buzz surrounding carbon and carbon sic (Siliconized carbon) brakes. Certain high end performance sports cars like Ferrari, Porsche, and Corvette) have Carbon Sic set ups as options. One thing is certaincars are being built to go faster, which require better brakes and better performance. Youll continue to see more racing brake innovations.

Things To Remember Obtaining Instant Auto Insurance Quotes

We live in a society that is reasonably technologically advanced where you can get most of your things instantly quickly and easily, so as auto insurance quotes, we all like to get things quickly so that we can save our time. Instant auto insurance quotes give us that I-want-it-all-I-want-it-now satisfaction.

Those days are long gone when you had to wait 24, 48 even 72 hours for some one to get back to you with a price quote? Now we have the convenience of one stop shopping in a manner of speaking.

There are several things we should keep in mind when we choose an instant auto insurance quote; following are some of the factors which affect your auto insurance quotes. All play a significant role in our premium rates.

Credit score Driving history Insurance history Age Demographics Usage

The more you speed the more likely you are to be involved in an auto accident. That will close some doors to you for insurance coverage. With others it will hike up your premiums considerably.

Getting instant auto insurance quotes is similar like those interviews you go on where find out right on the spot, you got the position and you walk out feeling on top of the world. It is the same concept with auto insurance quotes that are obtained instantly. Instead of the days spent sitting by the phone, the self-doubt, the anxiety in a matter of minutes you can find out how much, what it entails and make an informed decision just as easy as 1-2-3.

Insurance quotes that you can receive in a moment mean you dont have to sit around waiting for the mail to come. It is a convenience and free way to speed up your auto coverage from the comfort of your own home. Whereas a storefront may close at a certain time, the Internet provides you with 24/7 information about auto insurance. We live in a busy and fast paced world. The more we can do in less time the better. The peace of mind of knowing what car insurance options are available to you and pricing makes the selection process for auto insurance coverage easier and faster than ever before.

The word instant means within short gap of time, if you have requested any thing and other person gives you the services quickly thats call instant service. Just imagine for a moment how much easier our lives would be if we had the same convenience that is available as a result of auto insurance quotes instantly

Things to Consider When Selecting an Auto Repair Facility from Y & S Auto Body

Stability: Finding an auto body shop that has been in the same location for multiple years ensures that the company is reliable and not some fly by night company. Remaining in the same location is the sign of an excellent company that is a positive member and contributor to their community.

Multiple Locations: Having multiple locations allows for customer convenience, especially for those customers that cannot drive out to the body shop location. This is also a sign of a growing company experiencing due to its strong following and inherent excellent reputation.

Family Owned: A body shop that is family owned and operated will be trustworthy and honest because family owned businesses are strong participants in their community and offer many benefits and discounts to their loyal patrons. These businesses are typically very flexible and willing to always work with their customers. Servicing the same clientele from generation to generation is a strong sign of a well recognized and trustworthy company. Referrals from within the community as well as within families highlight a companys solid reputation.
Quality Control: There should always be some sort of mechanism at every critical point in the repair process eliminates wasted time and helps increase vehicle turnaround and efficiency. Without the proper quality control the body shop will be disorganized and chaotic. Having a system in place to manage this eliminates many problems automotive shops face.

Certification: Seeking out a body shop with certified mechanics eliminates the risk of having ill prepared mechanics working on your vehicle. Specialty certifications from auto manufacturers, such as the Jaguar Aluminum Certification, require special individual certifications, an investment in tools and a specially designated and isolated area to conduct aluminum repairs. Aluminum repairs require special certification as well as many other certifications that are necessary got a body shop to properly operate.

Direct Repair Facility (DRP): DRP for many of the most popular auto insurance companies enables an auto repair shop to start the process of estimation and repair immediately without the wasted time of waiting for the insurance company to come on site. This is a DRP relationship that takes years to achieve and continued customer satisfaction to maintain.

Experience: Trained body shop technicians with the highest level of certifications as well as a continued education program to keep them up to date with the latest methods and vehicle changes. Every vehicle is different in some way or form and each model from different years has slight changes. This requires mechanics and body shop workers to continue their education so as to not fall behind with the technology.

Best Practices: The use of best practices ensures the success of each repair job, while providing top notch customer service. Following the best practices is imperative to the success of any business.

Communication and Technology: Body shops should use industry standard enterprise software applications to monitor the activity of each automobile through the entire repair process. This increases communications from the car repair shop to the customer. The body shop and the insurance company should always be involved with one another. This will shorten the time to repair the vehicle and maintain a high level of customer satisfaction

Satisfaction: Sincere desire to provide 100% customer satisfaction on every job no matter how large or small. Seeking out a body shop that is focused on the customer rather than themselves is vital when searching for a body shop. Trained, courteous and knowledgeable customer service representatives and estimators ensure that each and every customer is completely satisfied.

Things to Consider When Looking for Affordable Auto Insurance and Best Auto Insurance Companies

Reliable and affordable auto insurance is hard to find if you dont have enough resources. By that, do you have what it takes to get you a reputable company on your side? Prior to joining different auto insurance companies, you need to understand that various insurance companies offer different rates. Therefore, it will be up to you to decide which insurance company you would like to go for.

There are a number of the best auto insurance tips that will absolutely help you obtain an enviable company that provides outstanding vehicle covers. To begin with, you have to perform a comprehensive research on the different insurance websites and compare some of the quotes provided and how best they will fit your budget, you and your car.

Having done this, you can advance ahead and combine all your policies together so as to earn yourself good discounts with your indemnity company when applying for auto insurance. Shopping around is another surefire way of obtaining a highly regarded insurance company for your car. Also, make sure you engage yourself to insurance companies that you find not only interesting but also provide affordable auto insurance to all its consumers.

Raising all your deductibles is also another positive way of getting yourself good car insurance since you will significantly lessen most of your premiums. If then again you have some troubles in obtaining the type of company that best fits you, then you can instead look for some help from an insurance broker who will in turn let you know of what companies have good rates in offers.

But most vital of all is to have a good understanding of what kind of cover you would want and that must be agree with the laws of the state that you reside. In fact, there are so many profitable discounts in offer from most insurance companies providing auto insurance, it will be up to you to choose the one that you find more comfortable with.

And if you are one of those individuals who regularly go for cover quotes through the Internet, then it is greatly believed that falling for a highly regarded company will be incredibly undemanding. Internet is one of the best ways of finding the best auto insurance and affordable auto insurance company. By that, searching insurance company will become handy if you know how to access the Internet and you can do this at the comfort of your home or at the office.

The Top Places to Find Auto Loans for People with Bad Credit

There are many auto loans for people with bad credit and you just have to know where to look for these loans. Finding the auto financing that you need is not always that easy, however, if you know where to look it can make it much easier for you. You are going to have to be able to back up what you put on your application a bit and this will help you to know what you need to prove.

When you put down a certain amount of income on an application for auto loans for people with bad credit you are going to have to prove it. This means that you have to either use bank statements, tax forms, or paycheck stubs. This means that you have to make sure you can prove the income you really make.

Another thing you have to prove is where you live. This is very typical when you are after auto loans for people with bad credit because they are going to want to know that you are living where you say you are living. You need to make sure you can provide a bill or a piece of mail that will allow you to prove your address.

The 3 Top Places to Get Auto Loans for People with Bad Credit

1. Online

There are many online lenders that you can use like My Auto Loans. These places will either lend you money because you are approved or they will help you find an auto loan that will give you what you need to get the vehicle you want. They will forward your information to the lenders they think will work best with you and they will help you get the money you need to get the vehicle you are after.

2. Your Bank

Sometimes your bank, especially if it is a credit union, will give out auto loans for people with bad credit to those that need them and have a good reputation with the bank. You do not need to let poor credit slow you down and if you have a decent amount of money to put down, then you can certainly get the auto financing you are after.

3. Buy Here Pay Here Dealers

If all else fails the fall back is the buy here pay here dealers. Make sure you find one that is not going to give you a huge payment and also make sure you get a buy here pay here dealer that has some type of warranty for you. It is necessary to find the right vehicle for you and sometimes when your credit is not all that good you have to use one of these types of dealers.

What to Expect from Auto Loans for People with Bad Credit

When you get a car loan and you have horrible credit or just less than perfect credit you have to expect to put a decent amount of money down. You have to make sure you have at least a thousand dollars to get a good car loan and this is considering you get a loan for around $10,000. If you get a larger loan you will need to put more down.

You should expect the interest rate and the term to be larger and longer than most auto financing is. You cannot expect to get the best deal from a dealer because you do have poor credit. It is not always that easy to get a low rate with not so good credit, but you can still get one of the auto loans for people with bad credit.

The Hardest Part of Any Auto Restoration Project

Classic car restoration is not only about restoring a vehicle, it’s about restoring the times of a bygone era. For hobbyists that restore these cars, it’s a labor of love.

Now, you’ve found the perfect classic car, perfect model – it just needs a little work. But, where to begin? The hardest part of any auto restoration project is determining the scope of the project. Without clear cut goals and budgets at the beginning, you can easily find yourself in an endless and ongoing relationship with your automobile. Your money will rapidly transfer itself to your car, your time will disappear, and your automobile will never be quite finished – because you’ll always find some other slight imperfection to work on and “fix”.

There is no one right way to go about restoring a car. But good restorers do have common traits that separate them from the ones that never seem to finish their restoration jobs.

1. The ability to set realistic goals – No matter how long you take or how much money you spend, you will never be able to restore a classic car exactly to it’s state when it was originally brought to the market. Body paints are produced differently now than in the past so while you can easily get a color match, you will never get an exact paint ingredient match. Likewise, the formulations of finishing materials such as varnishes, enamels, and so on are no longer the same. And the same is true for many of the other classic car components. So you, as the restorer, have to set realistic goals as to exactly what parts of the car you are going to restore to their original states and what parts of the car you are willing to restore “as close as possible” to their original states.

2. Patience – It may sound paradoxical, but without patience, your chance of finishing your auto restoration are slim. You need patience because a major restoration job is seldom without problems. You discover the fuel gauge is not working and you have to scrounge around for a replacement. Or, the electrical system is suddenly becoming erratic and you lose two weeks time resolving the problem. Without patience, you may well decide to just give up and abandon the project or leave it until another day that never comes.

3. Love of Research – A good restorer, by necessity, has to be a good researcher as well. A car restorer spends much of his time not actively working on the auto, but finding what replacement parts are needed for his classic car and locating them. There are times when you will find yourself literally doing research for an entire day. If you don’t love research – or at least like it a lot – you can be sure of many miserable days ahead.

4. Good manual skills – This goes without saying but unless you love working with your hands and have some skills to speak of, you might just as well take your checkbook out and pay someone to restore the car for you, because you’ll never get it done yourself.

It seems as though the hobby of restoring classic cars is having a resurgence but before you decide to take the leap yourself and outfit your garage with installation tools, make sure you have the traits that will let you succeed at your new hobby.

Teaching Tomorrow’s Auto Mechanics

Teaching a vocational auto mechanics program to high school students is a great way to keep them interested in learning. The unfortunate thing to note is that not all high schools offer this type of a program. However, in light of this issue many vocational and technical colleges offer auto mechanic classes for high school students during the summer and during the school year for a few hours each week. Taking a class of this sort will teach high school students two things that will help them through out their life. The tutor saliba learning method has been adapted to the vocational-tech curriculum for auto mechanics. This makes it easier for future mechanics to learn effectively through specialized teaching methods of speaking, seeing or hearing.

The first thing that it will teach them is a skill for their future. Many students go thorough high school without actually deciding what it is that they want to do in life. This class enables them to develop a skill that allows them to have a future when many of them may not have much hope. Whether they use the auto mechanic skills learned as a lifetime career or temporarily to pay for college, it gives them the keys to their future. It helps them to have a means of independence and a means to accomplish their goals in life. This is something that no teenager should be without. For some students, this may be the only chance that they have to carve out their own life and to accomplish their personal goals.

The second thing that this class will teach students is the value of hard work. In today’s society, a growing number of teens are developing a self-entitled attitude. They feel that they are entitled to have whatever it is that they desire without having to work for it. They have the idea that because of who they are they should be entitled to the best jobs and the best career opportunities. However, once out in the real world they discover that potential employers do not share their thoughts and they are at a loss for what to do. A vocational auto mechanics class is a great way for a student to learn that the only way to move forward in life is to work hard and get an education.

An auto mechanics vocational class is fun for most teen-agers. Although fun, it is also a tool in preparing them for life. The lasting skills and character traits that the students develop through the class will help to truly prepare them for life as an independent adult. They can learn a solid career skill that could be further developed and turned into a career that they enjoy. It could also allow them to put themselves through college when they would not have had a chance otherwise. It teaches hard work and perseverance over problems by using their brains and reasoning skills, rather than weapons and drugs.

Six Tips To Help You Choose a Good Auto Mechanic

Having your automobile break down is not a exciting experience but being unsure of where to take your car to get it repaired can be worse. Most people have a regular doctor, dentist, vet, accountant, etc. and most of the time we have chosen them in advance just in case we get sick or need adviceso why dont most people have a reliable auto repair facility to take their vehicle to? Automobiles are complicated systems, just like the human body so it is vital to take your car in to someone that you trust for regular maintenance.

Im an optimist and like to assume that auto repair shops are honest and that most auto repair technicians generally try to help you by recommending services that will keep your vehicle running smoothly and ultimately saving you time, money and stress by avoiding some major repairs that are due to a lack of preventative maintenance. Again, just like the human body, the better you take care of your vehicle, the better it will perform in the long run.

Ive put together a list of 6 things that will help you when looking for and researching an auto repair shop, help you avoid up sells and scams and help you find someone that you can trust to keep your vehicle and your pocket book in top shape.

1. Look For Mechanics That Are ASE Certified. ASE stands for Automotive Service Excellence. Having the ASE designation is just about important as having the letters “MD.” after your doctors name. Now dont get me wrong, there are decent mechanics who aren’t ASE certified, but generally its too risky unless they have been referred by someone you trust. Other important industry designations to be aware of are NAPA Auto Care and AAA.

2. Get A Referral From Your Friends or Co-Workers: Personal recommendations are worth their weight in gold. A reputable auto repair shop will be aware of the word of mouth effect personal recommendation is and it should be reflected in their overall level of customer service.

3. Always Ask For A Written Estimate Ahead Of Time. Additionally make sure the estimate says that they must call you before any work is done that wasnt originally approved by you. The written estimate should be very specific and break down all parts and labor charges separately.

4. Ask Them To Explain Their Warranties In Detail. Most car repair shops give a a 12 month/12,000 mile warranty on parts and labor. Make sure you understand exactly what it covers and what the exclusions or exceptions are. Dont be afraid of asking questions, a reputable facility should have nothing to hide.

5. Most Good Auto Repair Facilities Keep Their Work Area Organized And Clean. Their work area, tools, floor, etc should be reasonably clean. Now dont forget that the car repair business is not generally a super clean industry, but it still should be picked up and organized.

6. Ask what they recommend for upcoming maintenance and get written estimates. A reputable auto repair shop will have no problem doing this. They will know that you will have the opportunity to research to see if what they are recommending is necessary and if their rates are competitive. This indicates that they stand behind and have confidence in their recommendations and rates. Just make sure they dont overly pressure you into doing it right on the spot.

Doing your research ahead of time will help make sure that when you need a good auto repair shop, you wont be taken advantage of. Finding a good mechanic can be daunting, but it is extremely important. A reputable car repair shop will make extra effort to make sure you, your car and your pocket book are being well cared for. A little homework on your part now will give you peace of mind when you really need it.

Reef aquarium DIY auto-top off

As you know, evaporated water in your reef aquarium or fish only marine aquarium needs to be substituted with fresh water because salt does not evaporate.

I have seen many people use electric float valves directly plugged into their sumps which turns on a water pump when the water drops below a targeted point. In my opinion this is a a problem waiting to happen unless there are several safeties built in, this can be expensive and still not 100% fail proof. If the float valve or pump fails OPEN not only will you flood your floor you will also more than likely harm all your animals due to the fact the salinity levels will drop drastically. If you still insist on using an electric float and pump set-up, I suggest to look any further then the Tunze osmolator auto top-off. I have some friends who use it and they are satisfied.

If you want a Do-it-yourself gravity auto top-off, don’t hesitate to keep reading.

I have been operating a gravity feed along with a float set-up for the past 4 years without any issues. If kept really clean (clean algae and causations off the sump float valve) it will in no way over fill your sump with fresh water unless some freak accident occurs.

Here is a checklist of what you will need to build your own auto top-off.
An RO / DI unit (for both top-ups and water changes) a small water reservoir, an auto shut off pressure valve, a ” 1 way valve, an optional ” solenoid to switch main water to RO on and off, an electronic timer to control the solenoid, two plastic float valves, a bunch of tube , a 1/4 bulk head to connect the ” tube from the reservoir to the sump valve.
How does it all work? Its simple actually.

In order to keep my reservoir filled, my RO-DI runs for about 1 hour per day ( via electric solenoid). I do not procure much evaporation so that is a bit more than I need. It fills up the top-off reservoir tank up until the float valve blocks the RO tube causing backpressure, this pressure is what triggers the auto shut-off , therefore turning off the RO unit. It is fairly hard to explain this without pictures. The best way to get your RO-DI all plugged up with the 1 way valve and auto shut-off is to pay a visit to your RO-DI supplier website for instructions. Search for the filter guys, they have some great tutorials and schematics on their website.
I have the 2nd plastic float valve drilled into my sump, the other end connects into my reservoir. The ideal part about this set up is that it is gravity fed, no pumps. The valves work in such a way that they open ever so little as the water evaporates. Which is why the water trickles in at the same rate it evaporates. Salinity is very consistent!

To recap.

There are basically 2 systems in play here. The 1st one is the RO that fills up a reservoir tank that holds your top-off water. The reservoir has a float in it that when closed causes the RO-DI to switch off. On top of that you have an optional electric solenoid controlled by a timer that turns off the water supply to the unit. Overkill? Possibly, but Id rather not risk my livestock and floors for a $20 switch.

The second is moving the water from the reservoir into the sump when the sump water evaporates. With the set-up stated above you now have filled up your reservoir. In order to get it to top-off you will need to join a ” line to a bulkhead drilled into the reservoir tank and the other end of the line into the float drilled into your sump. As the water level of your sump lowers, the float will open slightly allowing water in.

Notice the double fail safe? Truth be told there are doubters but I love this set-up. No extra pumps, its secure and affordable.

Happy reefing and enjoy your own reef aquarium auto top-off.

Olathe No Credit Check Auto Sales – Tips for Buying From One of These Places

Located in the western part of Kansas is a city called Olathe. While Olathe is not very large in terms of population, with them only having around 125,000 people living there, it has still become one of the best cities in the country to live in. There are all kinds of jobs and great schools that make up this mid-Western town. Of course, even those who live in great cities can have bad credit scores. Having less than good credit can impact everything in your life from getting a job to buying a car. That is why Olathe no credit check auto sales places are so popular.

A lot of people do not like the idea of buying from a car place where they require you to pay there instead of a bank. They feel that this is a sign that the place is untrustworthy. However, you can safely buy a car from an Olathe no credit check auto sales dealership. You just have to know how to go about it. First, never go alone. You need someone with you to help keep you grounded when you start getting the hard sale from the salesperson. Never take the first offer they make you.

Next, you need to make sure that either you know something about cars and engines or the person you take with you does. Places like Olathe no credit check auto sales make a lot of their money off of people who have no clue about cars. Perhaps the car works just fine for the first month or so and then it breaks down. By then, it is usually too late to do anything about it except sue the dealership. This can be avoided, however, if you have someone to look at the car before you buy it.

Also, when you go to buy from an Olathe no credit check auto sales place, you need to stick to your guns. You should always have an amount in your mind that you will spend and not a penny more. Be sure to tell the salesperson the maximum amount you can afford to spend. If they try to push a car that will cost you even $50 more than your maximum, tell them you can’t and won’t budge. Most of the time, the salesperson will do everything they can to get you that car for the price you can afford.